SOLAR WINDMILL

2018

 

• Wind turbine rotor 27, is made of arched segments with blades 37, at least six of them (usually 6, 8, 10 or 12), placed on arched segmented rails 36, with bearings, where each of the arched segment 37, from the bottom side has attached an arched geared rack 35, which transmit rotational motion of the rotor 27, to the upper pair of conical gears (not numbered in the blueprint drawings), which are placed beneath the rotor 27. From the upper pair of conical gears (not numbered in the blueprint drawings), by means of vertical shaft, the motion is transferred to the lower pair of conical gears which transfer motion to the horizontal shaft (not numbered in the blueprint drawings), and that all together in this text has one integral name: Mechanism of rotational transmission 31, which is connected to the electric generator 32 and thus produces electric energy. Wind turbine rotor 27, together with electric generator 32, are consisting parts of the chimney 2.

•The chimney 2 can be produced either as one long pipe, or with telescopic extensions 33 and 34, which are extended to the upper cylindrical part 24. Lower cylindrical part 26, of the chimney 2, is connected to the upper part 24 through conical part 25. In side of the lower cylindrical part 26, of the chimney 2 a rotor 27 is partially placed (with vertical axes of rotation), where the inside diameter of the rotor 27 is almost equal to the outer diameter of the upper part 24, of the chimney 2, and outer diameter of the rotor 27 is almost equal to the inner diameter of the lower cylindrical part 26, of the chimney 2.

•Just above conical part 25, of the chimney 2, the angled pipes 28, are installed which connect the chimney 2 with spiral intake (not numbered in the blueprint drawings). On the entrance of every angled pipe 28 from chimney 2 one electromechanical valve 30 is installed, and on the bottom side entrance in the upper cylindrical part 24, of the chimney2, one valve 29 is installed. On the exit from top side of the upper cylindrical part 24, or on one of the extensions 33 and 34, of the chimney 2, on the cabin 46, one valve 42 is installed.